If you're on a quest for small décor statement pieces, then you've come to the right sisters! We have a simple yet timeless DIY tutorial to upcycle your go-to planters (because we all have our fav's that could use a little IOD love 😉). This project is complete in two simple steps, making it the perfect beginner tutorial for IOD transfers. Watch the video below to learn more about how to add beauty and color to your home projects.

Grab your IOD products and supplies by using the store locator and finding a stockist near you.

IOD Products Needed: 

• Seed Catalogue IOD Transfer

Other Supplies: 

• 3 Thrifted Buckets/Planters*  

*ours are from our friend Julie at Julie’s Designs & Signs.

Step-by-Step Guide:

STEP 1 - PREPARE YOUR SURFACE

This is a step that we skipped because our buckets were already finished. If you thrifted your buckets or are working with something that needs a little touch-up, make sure your surface is clean and that any paint is thoroughly dry. One of the most common issues we see when applying transfers is actually a paint application issue. In most instances, we see that the paint is not dry enough for application or the surface the paint was applied to was not prepped properly, causing the paint to lift with the transfer application. Our IOD Transfer 101 tutorial will give you all of the best tips and tricks. 

STEP 2 - CHOOSE YOUR DESIGN

Grab your IOD Seed Catalogue Transfer and choose a design for your project. This transfer set comes with eight pages of vibrant and truly timeless designs to choose from. Don’t worry, you’ll have plenty of designs left over for more fun IOD projects. 

STEP 3 - TRANSFER YOUR DESIGN

Remove the transfer from its white backing. Position the transfer over your planter, making sure that it does not touch until you are happy with the placement, and then commit. 

Using the transfer applicator provided in your Seed Catalogue transfer, start at one end of the transfer and rub firmly to adhere the image to the surface. Do this until the entire image is transferred. If any parts aren’t transferred when you lift, simply lay it back down and rub more on that portion. After it is transferred, use a small piece of the plastic backing sheet to burnish (smooth down) any bits that aren’t adhered fully. 

Voila! Happy making IOD lovelies!

If you're just kicking off your creative journey, have no fear — our Product 101 pages are packed with straightforward techniques to set you up for success. We're thrilled to accompany you as you explore and create. For more how-tos and creative inspo, make sure to browse through the rest of our blog.

Once you've crafted your final piece, share it with our Facebook Creative Tribe! This community is not just a showcase but also a supportive hub for when you hit those creative roadblocks. And remember, your local stockist is always ready to assist with IOD supplies and expert advice. We're excited to see what you'll bring to life!